![The Tool Connection Limited](/img/default-banner.jpg)
- Видео 894
- Просмотров 8 795 578
The Tool Connection Limited
Добавлен 14 авг 2009
The Tool Connection are suppliers of Automotive and General Hand Tools through distribution.
We are continuously developing and increasing our range of over 3,000 hand tools ranging from vehicle specific specialist tools to general hand tools with continuous product development and new innovation.
We are continuously developing and increasing our range of over 3,000 hand tools ranging from vehicle specific specialist tools to general hand tools with continuous product development and new innovation.
Deluxe Engine Support Beam 500kg | 8749 | Laser Tools |
⚠ Product Focus:
A heavy duty, fully adjustable, engine support bar, featuring 4 independently adjustable feet, which are mounted on two fore and aft adjustment beams that can pivot on the engine support bar, to position the support hook in the right place with ease. Allows for accurate vertical adjustment via a long threaded bar with large handled wing nut for ease of use. The feet are fitted with rubber ends, to prevent them slipping and/or causing any damage to paintwork.
✔️ Fully adjustable engine support beam with 4-point mounting system.
✔️ Foot width adjustment: 1100 - 1800mm.
✔️ SWL: 500kg (1100lbs).
✔️ Fore & aft adjustment beams: 870mm long.
✔️ Supplied with 1x 850mm long chain.
Availa...
A heavy duty, fully adjustable, engine support bar, featuring 4 independently adjustable feet, which are mounted on two fore and aft adjustment beams that can pivot on the engine support bar, to position the support hook in the right place with ease. Allows for accurate vertical adjustment via a long threaded bar with large handled wing nut for ease of use. The feet are fitted with rubber ends, to prevent them slipping and/or causing any damage to paintwork.
✔️ Fully adjustable engine support beam with 4-point mounting system.
✔️ Foot width adjustment: 1100 - 1800mm.
✔️ SWL: 500kg (1100lbs).
✔️ Fore & aft adjustment beams: 870mm long.
✔️ Supplied with 1x 850mm long chain.
Availa...
Просмотров: 292
Видео
Locking Wheel Nut Removal Kit | 8912 | Laser Tools |
Просмотров 91221 день назад
⚠ Product Focus: The Lug Driller, the ultimate tool to remove the most difficult locking wheel nuts/bolts where the key has been lost or damaged, in the quickest and safest way. Ideal for use by service centres, tyre fitting bays and roadside recovery drivers. All supplied in a blow mould case for convenient storage. ✔️ Removes damaged locking wheel bolts/nuts. ✔️ Set contents: 4x POM (polyoxym...
Trolley Jacks | 8835-8839 | Laser Tools |
Просмотров 29828 дней назад
⚠ Product Focus: This range of vehicle trolley jacks starts from a compact 2 tonne trolley jack with carrying handle, ideal for use by a mobile mechanic or as an emergency mobile jack, up to a low-profile 4 tonne trolley jack with quick lift, ideal for use on sports cars and lowered vehicles. 🔵 Part No. 8835 - Compact Trolley Jack - 2 Tonne 🔵 Part No. 8836 - Low Entry Trolley Jack - 2 Tonne 🔵 P...
Caravan Plastic Repair using a Nitrogen Plastic Welder with Generator | Part No. 92452 | Power-TEC
Просмотров 316Месяц назад
⚠ Product Focus: A plastic welder with its own Nitrogen generator, that eliminates the need for a nitrogen gas bottle. Workshop compressed air is used to maintain consistent temperature between welds - the nitrogen is only activated when pulling the trigger so that it’s not wasted between welds. Makes repairs that are stronger than any two-part epoxy or hot air weld. The plastics are melted tog...
Electro Power Accessory Kit from Power-TEC | Part No. 92692 |
Просмотров 246Месяц назад
Electro Power Accessory Kit from Power-TEC | Part No. 92692 |
Electro Power Push Pull System from Power-TEC | Part No. 92691 |
Просмотров 178Месяц назад
Electro Power Push Pull System from Power-TEC | Part No. 92691 |
Unpacking & setting-up your newly-delivered Miracle System - Master Kit | Part No. 92171 | Power-TEC
Просмотров 211Месяц назад
Unpacking & setting-up your newly-delivered Miracle System - Master Kit | Part No. 92171 | Power-TEC
Threaded Rod Wrench | 8704 | Laser Tools |
Просмотров 513Месяц назад
Threaded Rod Wrench | 8704 | Laser Tools |
Assorted Heat Shield Fastener Kit 150pc | 30286 | Connect Workshop Consumables |
Просмотров 206Месяц назад
Assorted Heat Shield Fastener Kit 150pc | 30286 | Connect Workshop Consumables |
Unpack & set-up your newly-delivered Miracle System Std Extra Kit + additional Lever Puller | 92180
Просмотров 1502 месяца назад
Unpack & set-up your newly-delivered Miracle System Std Extra Kit additional Lever Puller | 92180
Unpacking & setting-up your newly-delivered Miracle System Standard Kit | Part No. 92170 | Power-TEC
Просмотров 2412 месяца назад
Unpacking & setting-up your newly-delivered Miracle System Standard Kit | Part No. 92170 | Power-TEC
Portable Self-Priming Drill Pump | 8702 | Laser Tools |
Просмотров 7772 месяца назад
Portable Self-Priming Drill Pump | 8702 | Laser Tools |
Flexi-Head Adjustable Wrench 14 - 32mm | 8826 | Laser Tools |
Просмотров 4292 месяца назад
Flexi-Head Adjustable Wrench 14 - 32mm | 8826 | Laser Tools |
Track Rod Adjusting Wrench 690mm | 8828 | Laser Tools |
Просмотров 6082 месяца назад
Track Rod Adjusting Wrench 690mm | 8828 | Laser Tools |
Extendable Power Bars & Ratchet Handles | 8791, 8792, 8787, 8798 | Laser Tools |
Просмотров 5753 месяца назад
Extendable Power Bars & Ratchet Handles | 8791, 8792, 8787, 8798 | Laser Tools |
Brake Caliper Bleed Screw Repair Kit | 8670 | Laser Tools |
Просмотров 1,9 тыс.3 месяца назад
Brake Caliper Bleed Screw Repair Kit | 8670 | Laser Tools |
Compressed Air Tyre Bead Seater - 6L | 8771 | Laser Tools |
Просмотров 5123 месяца назад
Compressed Air Tyre Bead Seater - 6L | 8771 | Laser Tools |
Diagnostic Smoke Leak Detector Kit | 8831 | Laser Tools |
Просмотров 6633 месяца назад
Diagnostic Smoke Leak Detector Kit | 8831 | Laser Tools |
Pocket Gas Torch | 8710 | Laser Tools |
Просмотров 5114 месяца назад
Pocket Gas Torch | 8710 | Laser Tools |
Just Twist-to-Break Cable Ties from Connect Workshop Consumables | Part No. 31806 - 31809 |
Просмотров 2404 месяца назад
Just Twist-to-Break Cable Ties from Connect Workshop Consumables | Part No. 31806 - 31809 |
Self-Adjusting Oil Filter Pliers 60 - 120mm | 8786 | Laser Tools |
Просмотров 6554 месяца назад
Self-Adjusting Oil Filter Pliers 60 - 120mm | 8786 | Laser Tools |
Livery Reveal Event | Laser Tools Racing | 2024 |
Просмотров 1854 месяца назад
Livery Reveal Event | Laser Tools Racing | 2024 |
In-line Air Hammer Extractor | 8727 | Laser Tools |
Просмотров 2,1 тыс.4 месяца назад
In-line Air Hammer Extractor | 8727 | Laser Tools |
Adjustable Head Pry Bar Set 3pc | 8825 | Laser Tools |
Просмотров 3224 месяца назад
Adjustable Head Pry Bar Set 3pc | 8825 | Laser Tools |
Internal O-Ring Seal Fitting Tool Set | 8847 | Laser Tools |
Просмотров 9294 месяца назад
Internal O-Ring Seal Fitting Tool Set | 8847 | Laser Tools |
Locking Wheel Nut Removal Kit | 8842 | Laser Tools |
Просмотров 3 тыс.5 месяцев назад
Locking Wheel Nut Removal Kit | 8842 | Laser Tools |
Work Fast! Twist-to-Break Cable Ties | Part No. 31806 - 31809 |
Просмотров 1515 месяцев назад
Work Fast! Twist-to-Break Cable Ties | Part No. 31806 - 31809 |
Vehicle Ride Height Gauge from Power-TEC | Part No. 92666 |
Просмотров 2765 месяцев назад
Vehicle Ride Height Gauge from Power-TEC | Part No. 92666 |
Interchangeable Pliers Set 5-in-1 | 8763 | Laser Tools |
Просмотров 4705 месяцев назад
Interchangeable Pliers Set 5-in-1 | 8763 | Laser Tools |
Twist-to-Break Cable Ties | Part No. 31806 - 31809 | Connect Workshop Consumables
Просмотров 2865 месяцев назад
Twist-to-Break Cable Ties | Part No. 31806 - 31809 | Connect Workshop Consumables
Removing glow plugs is not easy, as per this video the glow plug here is easily accessed..in most cases the glow plugs are on the rear of the engine and usually in difficult-to-reach places, places you cannot even see unless using a mirror ..So assuming using the kit above will make removal easy is complete rubbish ..
Dove si può trovare
Cliccando sul link verrete indirizzati al nostro sito web, da lì potrete trovare i rivenditori online - www.lasertools.co.uk/Product/7839/Brake-Disc-Lip-Removal-Tool
Bought one of these but is utter useless on the wheel i have for my trailer, plastic funnel pops up and vapve sits on top valve hole but the removal hook works amazing
The Name of tools that used pls
Laser Tools Brake Caliper Bleed Screw Repair Kit, Part No. 8670
Until you leave all your tools under the customers car and it drives away
I seem to be magneticly attracted to this product.
🤣so are we.
Just replace them
Tap on a 21mm 6-point Socket once they swell up and replace all with solid lug nuts on 2015-20 F-150
Lol. You wanna sell the same old crap for an even HIGHER price. Just slap the word "Delux" into its title, then Bam! An instant $200 add on.
Does cold glue work on steel or metal bodies
Thanks for your comment. The car shown in the video is steel, but it can also be used on Aluminium.
I appreciate vids like these. Big fan of laser. Control arm knuckle / strut spreader is 🔥🔥
Really popular tool that.
Yes Iam!
I have one well looks exactly the same. Unnit came assembled but some parts were on back the front with no printed instructions.. Need to place on flat table. Would like to add a couple of cheap dial gauges. Will need to remove pins and drill the holes bigger. Much easier if it was already set up to accept dial gauges. The only cost another $36 aust and probly worth it. Apart from that i am happy with this unit.
Is this for 1.4tsi with ACT also? Or only 1.5tsi?
We do not currently cover the 1.4 TSI ACT engines, but we are currently working on the development of the correct adaptors for these engines and hope to have these in stock towards the end of the year
Quanto custa.,? Quero uma desta !!!😂
Aquí está el enlace que le permitirá saber el precio y dónde realizar el pedido. www.lasertools.co.uk/Product/8872/Multi-Head-Ratchet-Spanner-Set
Bella idea 🎉🎉🎉
Your Wheels have Nuts????
What is the best tool for fixing a rocker panel?
The Miracle System is the ideal solution. Alternatively, you can achieve some fantastic results using our hot glue tools and equipment.
Comment enlever une fiche capteur nemo
Lol don't need this
Bro first i thought it was UFO 😂
That would never work with a French design car. The whole sond is fitted in a narrow pocket of metal at an unpleasant angle with no torque possible to apply.
есть ссылка на продукт ??
Banana cleaner for jekyll
There's are very neat but I can't afford them, unless you have a sale at certain times during the year?
Link for purchase please
There's link to on-line retailers for this product on the bottom of the product page; www.power-tec.co.uk/Product/92645/Cold-Glue-Dent-Pulling-Kit-PDR
Hello, Well done with the video. My question is, if the hose has a innerdiameter of 5mm, should the "plug" also be 5mm or?
Man’s never heard of a funnel
or just buy a funnel for £1 from a supermarket
Doesn't work if your soket was vandalized too many times prior. May need to carefully "chisel " the outter shell and use 19.5 soket to remove metal nut
This kit contains a 19.5mm socket precisely for that reason.
Will this work on dual carbs? How would one know which one to adjust?
Note from our Technical team; you would adjust the carburettor that feeds the cylinder with the colortune tune in. Each carb will supply one or more cylinders; checking one of each cylinder for each carb will be fine, as the mixture will be shared across the cylinders.
фонарик уже не тот
The devils fleshlight
Bunu nerede alabilirim
amzn.eu/d/09Q6BVuu
Not worth it
Just use a wire brush!
😢
Туй е за индия
That's where mine broke. My dude looks happy AF. Lol
In the UK, not sure elsewhere, these are sold under the Laser brand. Got one to sort out dents.
It would have been nice to see the tool up close...
Wish mine was this simple to fix. Mine has broken right at the end where it joins to the rubber grommet part 🤦♂️
The puller thread leaves little meat for actual pulling. Mine just stripped it out. No-one wants the head off, but it's the only way. Chances of swarf are too high.
Turn on subs, turn off sound.
Fuckin nightmare setting them up😢
This is absolutely impossible to do, tried for 3hrs impossible to get it back in the hole, waist of time
use a lot of lube,i just tested it and is working
and add a lot of pressure otherwise not gonna go throught.
Where can I buy this tool
Links to on-line stockists can be found here; www.lasertools.co.uk/Product/8512/Extendable-Flexi-Head-Ratchet-1-2-inch-drive alternatively local stockists can be searched for here; www.lasertools.co.uk/stockist
I'm from India. Now I'm working in Dubai how can I buy this
@@prasanthgnana9034 we do not have any dealers currently in Dubai, but our website does include links to some of our online stockists who ship worldwide; www.lasertools.co.uk/Product/8512/Extendable-Flexi-Head-Ratchet-1-2-inch-drive
@@TheToolconnection thank you for support
Laser tools, guaranteed to break every time!
Are you supposed to flare the metal pipe in any way? Fuel injection systems can be 5-bar +, a rubber hose onto a metal pipe without any kind of flaring can easily blow off
Talking to our Technical Team; our kit /tools are just for the low pressure fuel lines, not the high pressure (5+ bar) side of the injection system. If you're looking to make repairs on the HP side, we don’t offer kits for this- you will need hard lines, bending and flaring tools to make up new lines. If you need further guidance, you can contact our team directly via e-mail; technical@toolconnection.co.uk or phone; 01926 818181
No newer model car shpuld ever gave to use this lol.
So everyone has a new car?